Silent Bearing Puller Kit for BMW

74,95 

  • Silent bearing tool set for BMW, 16 pcs as below
  • A feed rod:
  • Length: 8.9″
  • Thread size: M12 x 0.1″
  • Hex drive wrench length: 0.3″
  • Used for actuating the Silent bearing
  • A spindle nut:
  • Thread size: M12 x 0.1″
  • Hexagonal drive wrench length: 0.7″
  • A compression nut(with axial groove bearing):
  • Internal thread size: M12 x 0.1″
  • Hexagonal drive wrench length: 0.9″
  • A support sleeve(side slits):
  • Outer diameter: 2.8″
  • Inner diameter 2.3″
  • A support plate:
  • Hole diameter: 0.5″
  • Outer diameter 2.8″
  • Trimmed with outer diameter: 2.2″
  • Height 0.5″
  • A pull-out pressure sleeve:
  • Internal thread zies: M12 x 0.1″
  • outer diameter: 2″
  • Inner diameter 2″
  • Height: 1.4″
  • An intake pressure sleeve:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.3″
  • Inner diameter: 1.9″
  • Height: 1.7″
  • A pull-out spacer sleeve:
  • Bore diameter: 0.5″
  • Outer diameter: 2.2″
  • Inner diameter: 1.8″
  • Height: 2.8″
  • A pull sleeve:
  • Hole diameter: 0.5″
  • Outer diameter: 1.8″
  • Inner diameter 1.4″
  • Height: 1.2″
  • An intake spacer sleeve:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.2″
  • Inner diameter: 1.8″
  • Height: 1.2″
  • With lateral phase
  • A spacer sleeve:
  • Hole diameter: 0.5″
  • Outer diameter: 2.3″
  • Inner diameter 1.9″
  • Height: 2.4″
  • A pressure element:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2″
  • Iinner diameter: 1.3″
  • Height: 1″
  • A sleeve:
  • Bore diameter: 0.5″
  • Outer diameter: 2.6″
  • Inner diameter 2″
  • Height: 2.8″
  • A pull-out pressure piece:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 1.9″
  • Inner diameter: 1.3″
  • Height: 0.8″
  • An intake pressure piece:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.6″
  • Inner diameter: 1.3″
  • Height: 0.8″
  • A draw- plate:
  • Hole diameter: 0.5″
  • Outer diameter: 2″
  • Trimmed with outer diameter: 1.8″
  • Height:0.5″
  • A molded case, various print pieces, stem and pods are included
  • Allows the renewing of rubber bushings the suspension
  • Suitable for vehicles from BMW, 1 Series models (e.g. E81 , E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64 , E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model)

Esaurito

COD: PP210197UPW Categorie: , ,

It is a professional tool for commercial or DIY use. The kit is ideal assistance for you to remove and install ball joints, bushes and bearings for numerous BMW models from 1 Series to 8 Series.

This silent bearings tool set is designed for long life in daily workshop use and categorized into industrial grade. All tools are sorted in a blow molded case for easy storage and transportation.

  • Silent bearing tool set for BMW, 16 pcs as below
  • A feed rod:
  • Length: 8.9″
  • Thread size: M12 x 0.1″
  • Hex drive wrench length: 0.3″
  • Used for actuating the Silent bearing
  • A spindle nut:
  • Thread size: M12 x 0.1″
  • Hexagonal drive wrench length: 0.7″
  • A compression nut(with axial groove bearing):
  • Internal thread size: M12 x 0.1″
  • Hexagonal drive wrench length: 0.9″
  • A support sleeve(side slits):
  • Outer diameter: 2.8″
  • Inner diameter 2.3″
  • A support plate:
  • Hole diameter: 0.5″
  • Outer diameter 2.8″
  • Trimmed with outer diameter: 2.2″
  • Height 0.5″
  • A pull-out pressure sleeve:
  • Internal thread zies: M12 x 0.1″
  • outer diameter: 2″
  • Inner diameter 2″
  • Height: 1.4″
  • An intake pressure sleeve:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.3″
  • Inner diameter: 1.9″
  • Height: 1.7″
  • A pull-out spacer sleeve:
  • Bore diameter: 0.5″
  • Outer diameter: 2.2″
  • Inner diameter: 1.8″
  • Height: 2.8″
  • A pull sleeve:
  • Hole diameter: 0.5″
  • Outer diameter: 1.8″
  • Inner diameter 1.4″
  • Height: 1.2″
  • An intake spacer sleeve:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.2″
  • Inner diameter: 1.8″
  • Height: 1.2″
  • With lateral phase
  • A spacer sleeve:
  • Hole diameter: 0.5″
  • Outer diameter: 2.3″
  • Inner diameter 1.9″
  • Height: 2.4″
  • A pressure element:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2″
  • Iinner diameter: 1.3″
  • Height: 1″
  • A sleeve:
  • Bore diameter: 0.5″
  • Outer diameter: 2.6″
  • Inner diameter 2″
  • Height: 2.8″
  • A pull-out pressure piece:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 1.9″
  • Inner diameter: 1.3″
  • Height: 0.8″
  • An intake pressure piece:
  • Internal thread size: M12 x 0.1″
  • Outer diameter: 2.6″
  • Inner diameter: 1.3″
  • Height: 0.8″
  • A draw- plate:
  • Hole diameter: 0.5″
  • Outer diameter: 2″
  • Trimmed with outer diameter: 1.8″
  • Height:0.5″
  • A molded case, various print pieces, stem and pods are included
  • Allows the renewing of rubber bushings the suspension
  • Suitable for vehicles from BMW, 1 Series models (e.g. E81 , E87; 3 Series E36, E46, E83, E90, E91, E92, E93; 5 Series models E60, E61, E63; 6 Series models , E64 , E38; 7 Series models, E65, E66, E67; 8 Series models E31, E85 Z4 models, E86, and Mini Cooper S R53 model)
Numero di Colli Spedizione

Tempo stimato di Consegna

Peso

Volume di Consegna

Torna su